El Config.h que estoy utilizando es para el 1.1.9 que me lo pasó un amigo que le funciona bien, Acabo de darme cuenta que si activo la SD y el m500 de la EEPROM (el los tenia desactivados) es cuando me da el error de memoria ¿que opciones superficiales podria deshabilitar para que no me pase eso?
Perdonar si no doy datos muy tecnicos
He bajado de GitHub una version del Marin 2.0 y peor aun jajajajajjja...que desesperacion
Arduino:1.8.9 (Windows Store 1.8.21.0) (Windows 10), Tarjeta:"Anet V1.0"
In file included from sketch\endstops.cpp:35:0:
sketch\endstop_interrupts.h: In function 'void setup_endstop_interrupts()':
endstop_interrupts.h:121:7: error: non-constant condition for static assertion
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "X_MIN_PIN is not interrupt-capable");
^~~~~~~~~~~~~
In file included from C:\Users\jbarciela\Documents\ArduinoData\packages\arduino\hardware\avr\1.8.2\cores\arduino/Arduino.h:258:0,
from sketch\HAL.h:36,
from sketch\MarlinConfig.h:39,
from sketch\Marlin.h:35,
from sketch\endstops.cpp:27:
C:\Users\jbarciela\Documents\ArduinoData\packages\Anet\hardware\avr\1.0.0\variants\sanguino/pins_arduino.h:117:66: error: reinterpret_cast from integer to pointer
#define digitalPinToPCICR(p) ( (((p) >= 0) && ((p) <= 31)) ? (&PCICR) : ((uint8_t *)0) )
~^~~~~~~
sketch\endstop_interrupts.h:121:21: note: in expansion of macro 'digitalPinToPCICR'
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "X_MIN_PIN is not interrupt-capable");
^~~~~~~~~~~~~~~~~
In file included from sketch\endstops.cpp:35:0:
endstop_interrupts.h:141:7: error: non-constant condition for static assertion
static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "Y_MIN_PIN is not interrupt-capable");
^~~~~~~~~~~~~
In file included from C:\Users\jbarciela\Documents\ArduinoData\packages\arduino\hardware\avr\1.8.2\cores\arduino/Arduino.h:258:0,
from sketch\HAL.h:36,
from sketch\MarlinConfig.h:39,
from sketch\Marlin.h:35,
from sketch\endstops.cpp:27:
C:\Users\jbarciela\Documents\ArduinoData\packages\Anet\hardware\avr\1.0.0\variants\sanguino/pins_arduino.h:117:66: error: reinterpret_cast from integer to pointer
#define digitalPinToPCICR(p) ( (((p) >= 0) && ((p) <= 31)) ? (&PCICR) : ((uint8_t *)0) )
~^~~~~~~
sketch\endstop_interrupts.h:141:21: note: in expansion of macro 'digitalPinToPCICR'
static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "Y_MIN_PIN is not interrupt-capable");
^~~~~~~~~~~~~~~~~
In file included from sketch\endstops.cpp:35:0:
endstop_interrupts.h:161:7: error: non-constant condition for static assertion
static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "Z_MIN_PIN is not interrupt-capable");
^~~~~~~~~~~~~
In file included from C:\Users\jbarciela\Documents\ArduinoData\packages\arduino\hardware\avr\1.8.2\cores\arduino/Arduino.h:258:0,
from sketch\HAL.h:36,
from sketch\MarlinConfig.h:39,
from sketch\Marlin.h:35,
from sketch\endstops.cpp:27:
C:\Users\jbarciela\Documents\ArduinoData\packages\Anet\hardware\avr\1.0.0\variants\sanguino/pins_arduino.h:117:66: error: reinterpret_cast from integer to pointer
#define digitalPinToPCICR(p) ( (((p) >= 0) && ((p) <= 31)) ? (&PCICR) : ((uint8_t *)0) )
~^~~~~~~
sketch\endstop_interrupts.h:161:21: note: in expansion of macro 'digitalPinToPCICR'
static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "Z_MIN_PIN is not interrupt-capable");
^~~~~~~~~~~~~~~~~
exit status 1
non-constant condition for static assertion