07-11-2013, 08:31 PM
Cuando quieras!
Tengo por ahí juguetitos interesantes jajajaja
Salu2
Tengo por ahí juguetitos interesantes jajajaja
Salu2
Problemas al mover eje Z.
|
07-11-2013, 08:31 PM
Cuando quieras!
Tengo por ahí juguetitos interesantes jajajaja Salu2
08-11-2013, 02:40 PM
biketrial981 escribió:Cuando quieras!
NOVEDAD: CoreXY Eternal Edition (Custom) -> https://www.spainlabs.com/foros/tema-Ete...So-Edition
Mi Prusa i3 -> https://www.spainlabs.com/foros/tema-Un-clon-mas
08-11-2013, 08:29 PM
Esto ya empieza a parecer forocarros jajajaja
09-11-2013, 11:12 AM
:roto2: jajaja
|
Posibles temas similares… | |||||
Tema | Autor | Respuestas | Vistas | Último mensaje | |
Problemas al hacer homing en eje Z | epinto | 10 | 4,714 |
04-10-2014, 11:44 PM Último mensaje: epinto |
|
problemas al imprimir eje Y | kungues | 3 | 1,507 |
29-06-2014, 08:46 PM Último mensaje: kungues |
|
Mover el extrusor sin el filamento | homer32 | 6 | 3,981 |
10-12-2013, 07:19 PM Último mensaje: alexci31 |
|
problemas con el eje z | kungues | 2 | 1,456 |
29-09-2013, 12:00 PM Último mensaje: yo_mismo |