12-04-2020, 10:22 AM
Buenas a todos,
Tengo una CR10S, ayer me puse a subir a marlin 2.0 , cuando actualicé todo me ha dado un problema al hacer homing, se bloquea y me pide reiniciar la impresora.
Cuando le doy a hacer homing se mueve apenas unos milímetros en cada eje y posterior da el fallo, os pongo un enlace del vídeo para que veáis el error
https://drive.google.com/file/d/1F57RPgV9TrdRtmaD9ppIo7H8Wa3WXv61/view?usp=sharing
He probado varias cosas como ver la lógica de los finales de carrera y están bien,
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
Con el pronterface he probado su funcionamiento con M119 y todo correcto,
SENDING:M119
Reporting endstop status
x_min: TRIGGERED
y_min: TRIGGERED
z_min: TRIGGERED
filament: TRIGGERED
He cambiado al firm de fabrica y todo correcto, funciona perfectamente, por lo cual es problema de algunas líneas en el código, no he cambiado nada de lo que venía por defecto, solo el idioma y el nombre de la impresora (chorradas....)
Soy novato en ésto del marlin, quiero aprender todo lo posible así que cualquier dato que necesitéis me lo comentáis.
Saludos y gracias de ante mano
Tengo una CR10S, ayer me puse a subir a marlin 2.0 , cuando actualicé todo me ha dado un problema al hacer homing, se bloquea y me pide reiniciar la impresora.
Cuando le doy a hacer homing se mueve apenas unos milímetros en cada eje y posterior da el fallo, os pongo un enlace del vídeo para que veáis el error
https://drive.google.com/file/d/1F57RPgV9TrdRtmaD9ppIo7H8Wa3WXv61/view?usp=sharing
He probado varias cosas como ver la lógica de los finales de carrera y están bien,
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
Con el pronterface he probado su funcionamiento con M119 y todo correcto,
SENDING:M119
Reporting endstop status
x_min: TRIGGERED
y_min: TRIGGERED
z_min: TRIGGERED
filament: TRIGGERED
He cambiado al firm de fabrica y todo correcto, funciona perfectamente, por lo cual es problema de algunas líneas en el código, no he cambiado nada de lo que venía por defecto, solo el idioma y el nombre de la impresora (chorradas....)
Soy novato en ésto del marlin, quiero aprender todo lo posible así que cualquier dato que necesitéis me lo comentáis.
Saludos y gracias de ante mano