31-01-2014, 12:07 PM
Tiene muy buena pinta....
http://www.open-electronics.org/acme-sys...nux-board/
http://www.open-electronics.org/acme-sys...nux-board/
Cita:Here are the specs:
CPU: Atmel’s AT91SAM9G25 (ARM9 clocked @ 400Mhz)
RAM: 128 MByte DDR2
MicroSD Socket for up to 32GB bootable Linux microSD (not included)
USB 2.0 ports: 1 hi-speed host/device, 1 hi-speed host, 1 full-speed
UART: 1 (RXD,TXD,RTS,CTS)
I2C bus: 1
SPI bus: 1 with 2 chip select (5 to 50 MHz)
PWM: 4 lines
A/D converters: 4 channels@10 bit
Size: 25x51mm
Power supply: single 3.3 Volt DC
Line levels: TTL 3.3V (NOT 5V tolerant)
Operative temperature range: -20 +70 °C
Pinstrip: 20×2 pitch 2,54mm (100mils)
PCB layers: 8