23-06-2020, 12:18 PM
Hola buenas estoy intentado instalar Marlin 2.0 en mi anet A6-l (Una anet a6 con pantalla de anet A8) y me está dando error al ahora de subir los archivos.
La compilación la hace correctamente osea que el código está correcto.
Os dejo el link a la impresora: https://es.aliexpress.com/item/328338672...63c0xsPI48
La compilación la hace correctamente osea que el código está correcto.
Os dejo el link a la impresora: https://es.aliexpress.com/item/328338672...63c0xsPI48
Código:
Arduino:1.8.13 (Windows 10), Tarjeta:"Anet V1.0"
El Sketch usa 115370 bytes (90%) del espacio de almacenamiento de programa. El máximo es 126976 bytes.
Variables globales usan 4385 bytes de memoria dinamica.
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xd6
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x6f
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x80
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xbf
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xae
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xd6
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x02
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x21
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xcc
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xd6
Ha ocurrido un error mientras se enviaba el sketch
Este informe podría contener más información con
"Mostrar salida detallada durante la compilación"
opción habilitada en Archivo -> Preferencias.