26-04-2016, 05:57 PM
Buenas , alguien sabe que comando tengo que introducir al final de la impresión para que me para la cama caliente en Cura, ahora mismo tengo esto:
; -- END GCODE --
M104 S0 ;extruder heater off
G91 ;relative positioning
G1 E-20 F50 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+10 F{travel_speed} ;move Z up
G90 ;absolute positioning
G1 X0 Y10 F{travel_speed} ;move Z up a bit and retract filament even more the way
M84 ;steppers off
; -- end of END GCODE --
; -- END GCODE --
M104 S0 ;extruder heater off
G91 ;relative positioning
G1 E-20 F50 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+10 F{travel_speed} ;move Z up
G90 ;absolute positioning
G1 X0 Y10 F{travel_speed} ;move Z up a bit and retract filament even more the way
M84 ;steppers off
; -- end of END GCODE --