This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 1 voto(s) - 4 Media
  • 1
  • 2
  • 3
  • 4
  • 5
problemas con la temperatura
#1
Hola este es mi primer mensaje pero es que tengo un problema con una pieza que trae loco
siempre que intento imprimir esa pieza, una tapa para la ramps me sale error de temperatura en mitad de la impresión, solo con esa pieza, 
ya he hecho piezas muy similares y no he tenido ningún problema
Cambie el termistor y nada sigue igual.
Si hay alguien que me pueda echar una mano por favo
  Responder
#2
Sera el archivo stl mal, prueba a crearlo de nuevo
  Responder
#3
Hola,

no pones que error te sale pero yo probaria a hacer un pid autotune y cargar de nuevo marlin con los valores que te ha dado.

Si el error es thermal runaway, puedes editar en configuration.h :

// If you want to enable this feature for all your extruder heaters,
// uncomment the 2 defines below:

// Parameters for all extruder heaters
#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 5 // in degree Celsius

// If you want to enable this feature for your bed heater,
// uncomment the 2 defines below:

// Parameters for the bed heater
#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 20 //in seconds
#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 3 // in degree Celsius

y subir algun grado.

Saludos.
  Responder
#4
Gracias por vuestras respuestas, ya lo tengo solucionado, cambie el cableado del termistor debía estar defectuoso y ya no me ha vuelto a pasar,
la cosa es que solo me pasaba cuando intentaba imprimir la misma pieza por eso eso no sabia que pasaba.
Gracias de todos modos.
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  problemas en el inicio con temperatura alta del extrusor guttygf 8 287 27-01-2023, 07:43 PM
Último mensaje: guttygf
  CONSULTA Pierdo temperatura con ventilador de capa br0nka 5 3,179 27-11-2018, 01:45 PM
Último mensaje: Nullz
  Problema con la temperatura del extrusor TusRemuertos 4 2,343 01-06-2018, 04:36 AM
Último mensaje: Fendetestas
  Problemas de temperatura jmcs 2 1,231 21-02-2018, 06:03 PM
Último mensaje: jmcs
  Problemas con... ¿temperatura? pevire 5 1,931 16-02-2018, 08:38 AM
Último mensaje: pevire