This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 1 voto(s) - 4 Media
  • 1
  • 2
  • 3
  • 4
  • 5
calibrar eje Z altura prusa I3
#1
Buenas, como aún no di con la tecla para configurar Marlin, estoy con Sprinter pero tengo un problema que aún no he conseguido resolver....

Viene configurado para varillas de 8mm, y la I3 lleva de 5mm, por lo que las piezas me las aplasta. El cubo de calibración me sale de 210x210x50

Alguien que me eche una mano? Guiño


Salu2
  Responder
#2
Si subo alguna foto, te verás identificado.. Confundidois1:
  Responder
#3
[Imagen: ywok.jpg]

Como esta? XD

El primero fue la pirámide, después el llavero y por último el cubo vacío. En el cubo ya se ve que va bastante bien, sin contar que tenía que ser el doble de alto.... XD
  Responder
#4
Ni de coña, solo tengo el Repetier y nanai.. aquí no levanta nada.
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  CONSULTA Cambio de filamento con M600 resume a altura incorrecta. lorenzzomp 4 376 03-09-2022, 09:32 PM
Último mensaje: Macuho
  CONSULTA Al imprimir una pieza, no respeta la altura diseñada LMG03 3 1,621 13-08-2018, 11:42 PM
Último mensaje: LMG03
  error en altura al hacer G29 ngc1300 11 4,248 03-03-2018, 07:23 AM
Último mensaje: ngc1300
  Altura pieza impresa inferior a la programada linterna 0 1,414 29-11-2016, 10:49 AM
Último mensaje: linterna
Fotografía Comenzar a imprimir a la altura en la que falló Jesustabakko 3 5,006 01-06-2016, 07:41 PM
Último mensaje: Jesustabakko