This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 1 voto(s) - 2 Media
  • 1
  • 2
  • 3
  • 4
  • 5
VENDO Varios FPV ImmersionRC
#1
Hola , me he cansado de pelearme con los 5.8gHz para el avión FPV sin conseguir un buen alcance y me voy a los 1,2ghz por lo que vendo todo el material que he comprado últimamente.


- Rx ImmersionRc UNO5800 -> 60€

[Imagen: attachment.php?attachmentid=60811&stc=1&d=1435016331]

- Tx ImmersionRc 5.8gHz 600mw modificado con disipador -> 65€
Lo modificamos por que en la primera prueba vimos que se calentaba en exceso, ya con el disipador la mejoría es notable. Este modulo parece que va algo dopao de potencia Guiño , podeis ver las fotos tomadas hoy para el anuncio.

[Imagen: attachment.php?attachmentid=60812&stc=1&d=1435016331]
[Imagen: attachment.php?attachmentid=60813&stc=1&d=1435016331]
[Imagen: attachment.php?attachmentid=60815&stc=1&d=1435016331]
[Imagen: attachment.php?attachmentid=60814&stc=1&d=1435016331]
[Imagen: attachment.php?attachmentid=60816&stc=1&d=1435016331]

- Panel antena AOMWAY 14dbi RHCP -> 15€
Se le ha sustituido el cable para poderla montar en el tracker

- Juego antenas SPW para los modulos anteriores de Rx y Tx -> 40€ las dos.
Diseñadas y calculadas para el canal 4 (5800mhz) de immersionRC, balun para desacoplar el plano de tierra.

[Imagen: attachment.php?attachmentid=60817&stc=1&d=1435016331]

Portes incluidos para todos los artículos por correos
Envio mas fotos y respondo cualquier duda por wasa 6/2/9/4/4/5/5/8/8
Un saludo
Mis diseños y mejoras Prusa i3 en Thingiverse
http://www.thingiverse.com/amancera/designs/
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  Regalo/cambio varios rollos nuevos de filamento de 3mm PacoMB 3 1,198 24-12-2020, 01:00 PM
Último mensaje: PacoMB
  Kit Dron 250 550 o FPV CHA 0 1,366 05-01-2017, 03:01 PM
Último mensaje: CHA
  Fpv en Android franmamme 1 1,199 29-11-2016, 10:17 PM
Último mensaje: franmamme
  35€ Vendo MONITOR LED 9" DIY para FPV o para cualquier otro uso. JUANANT8 3 1,732 16-11-2016, 02:10 PM
Último mensaje: JUANANT8
  Transmisor + Camara FPV integrado 35€ g.i. Briefer 1 1,206 01-06-2016, 12:22 PM
Último mensaje: Briefer