This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
NEMA 17
#1
Hola a todos saludos desde argentina, les quiero preguntar lo siguiente, estoy armando una prusa i3 rework y tengo motores Epson de una vieja impresora común y quería que me den su opinión de si funcionarían en mi prusa rework

A continuación les dejó las especificaciones

ACTUALIZACION DE DATOS: TOREQUE 3,2 KG/CM2

motor-bipolar stepper:EM-258 aka 17PM-K212-PIT aka STP-42D144 Minebea - Astrosyn Shinano Kenshi Stepper with metal gear
This is the equivalent to Astrosyn SST-024 with a 10 Ohm coil. These were pulled from an Epson printer assembly. The high holding torque and small pakcage size makes it ideal for small CNC or robotics project RepRap. It includes a metal gear 
Manufacturer page:Minebea - Astrosyn Shinano Kenshi 
Specifications
Nominal Voltage 7
Current 0.7
Resistance (Ohms) 10
Torque (in-oz) 44.4
Torque (kg*cm) 3.2
Wires 4
Condition pulled
Steps / Revolution 200
Made in China
weight 175 grams
Step Size (degrees) 1.8
NEMA frame size 17
QTY available 4




Enviado desde mi XT1021 mediante Tapatalk
  Responder
#2
en principio tiene las mismas caracteristicas ,medidas nema 17,200 pasos ,y el torque parece suficiente.todo es probar...
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  DUDA Donde es mejor colocar los NEMA Kevintuentix 2 1,258 23-11-2019, 11:20 AM
Último mensaje: Kevintuentix
  Nema 17 con conector raro. diaconuliviu85 2 1,284 07-06-2019, 09:06 PM
Último mensaje: dasafur
  pasar de 20 a 16 dientes poleas motores Nema 17 chuachealmagro 12 3,071 12-04-2019, 05:47 AM
Último mensaje: chuachealmagro
  Selección de motor eje z [Nema 17] [Ayuda] JuanMM 1 1,552 27-03-2014, 02:15 PM
Último mensaje: Coricoco