This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 1 voto(s) - 3 Media
  • 1
  • 2
  • 3
  • 4
  • 5
LCD sin driver
#1
Buenas gente,

Estoy empezando con esto de los micros y me pille un lcd por Ebay, por la pinta exterior que tenia pense que seria compatible con la libreria UTFT pero al instalarla veo que no, buscando por la web me encuentro que el controlador podria ser el SPFD5408 pero no logro encontrar un controlador que funcione Confundidomiley-confuse: , intente preguntarle al vendedor pero tiene menos idea que yo jaja, lo unico que viene en la descripción del producto es:

2.4" TFT LCD Shield Touch Panel Módulo TF Micro SD para Arduino UNO R3

2.4" diagonal LCD TFT display
Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control
Colorful, 18-bit 262,000 different shades
4-wire resistive touchscreen

8 bit digital interface, plus 4 control lines
Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the micro SD
5V compatible, use with 3.3V or 5V logic

URL -> http://www.ebay.es/itm/261920529083?_trk...EBIDX%3AIT

Foto -> http://es.tinypic.com/r/30udzd0/8

A ver si me podeis echar un cable, gracias Gran sonrisa Gran sonrisa
  Responder
#2
Buenas, ese mismo tengo desde hace tiempo y lo hago funcionar sin problemas.
Mira esta pagina que te ayudará a hacerlo funcionar:
http://www.electrohobby.es/tft-lcd-touch...duino-uno/
En mi caso tuve que cambiar el controlador para que funcionase ('tft.begin(0x9325);', es cuestion de que vayas probando.
Ya dirás como va.
Saludos.
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  control servo sin libreria "servo.h" homer32 11 10,694 08-12-2016, 01:25 PM
Último mensaje: homer32
  motor pap y driver fjgranado 0 1,212 05-11-2015, 12:10 PM
Último mensaje: fjgranado