This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 1 voto(s) - 3 Media
  • 1
  • 2
  • 3
  • 4
  • 5
DA Ayuda, cómo hacer para que a partir de X capa cambie la configuraciónn
#1
Que tal, me gustaría saber si existe alguna opción para que a partir de X capa la configuración de la impresora cambie; ya sea: velocidad, temperatura, flujo, etc.
Programa que uso: Cura.

Por ejemplo: Estoy imprimiendo un cubo y en la parte de arriba tiene una letra. Para imprimir el cubo no necesito calidad así que se puede imprimir rápido pero a la hora de imprimir la letra necesita precisión y tendrá que bajar considerablemente la velocidad a partir de la capa número 30 (es un ejemplo) existe una forma de hacerlo automáticamente?

Desde ya muchísimas gracias!
  Responder
#2
Eso que quieres solamente lo podras hacer utilizando simplify3d para generar procesos diferentes que cambian el gcode generado a partir de la altura que tu le especificas. Que yo sepa solo hay un software con esta opción y es ese.
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  CONSULTA !!Ayuda!! Marlin 2.0 No consigo hacer Home en el centro de la cama caliente juankike 8 3,547 28-03-2022, 09:57 PM
Último mensaje: SoMAG
  AYUDA CON MKS SBASE V1.3, COMO REGULAR CORRIENTE DRV8825 ... fontaromanogr 6 2,201 29-05-2021, 05:40 PM
Último mensaje: fontaromanogr
  CURA 4.8: Cómo hacer que no haga tantos desplazamientos PacoMB 3 1,098 30-01-2021, 02:46 PM
Último mensaje: Simemart
  Como configuro bien mi Cura para mi Ender 3 pro Antonio Vivanco 1 1,352 19-07-2020, 10:46 PM
Último mensaje: pano
  Problema al hacer Homing tras subir a Marlin 2.0 fruns 9 2,961 24-04-2020, 08:33 AM
Último mensaje: Ovt