This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
CONSULTA anet A8 no calienta
#1
Saludos, compre una A8 y después de 3 impresiones dejó de calentar hasta los 200ºc, pensé era el cartucho ceramico y lo cambie pero seguia igual, ajuste el PID del extrusor pero al iniciar el calentamiento se reseteava. Decidi cambiar el software por el marlin pero al llegar a los 170ºc marca erreor E1 al calentar, reiniciar impresora.
  Responder
#2
Revisa que la fuente este bien. Mide con un polimetro la tension en su salida y fijate si la tension no cae de los 10.5 o 11v.
Las fuentes de las anet suelen dejar mucho que desear y cuando estan mal y dan poca potencia suelen causar problemas con el calentamiento ya que no pueden con su alma alimentando ni el extrusor (40w aprox)... y no digamos ya la cama caliente.
  Responder
#3
Hola! pudiste solucionarlo? me pasó varias veces y con darle un ajuste a la conexion del cartucho (en la parte del aislante) se soluciono, sino revisa el termistor que esté midiendo bien... saludos!
  Responder
#4
Parece que si es la fuente, le puse la de mi CNC y calento sin marcar errores. Pero no he tenido tiempo de probarla.
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  Extrusor no calienta korta 18 10,562 15-11-2023, 03:36 PM
Último mensaje: Simemart
  CONSULTA CAMA CALIENTE SE CALIENTA AL ENCHUFAR LA MAQUINA bmaizcruz 4 496 29-01-2022, 01:39 AM
Último mensaje: bmaizcruz
  Anet A8 - Extrusor no calienta Robeboyg 3 1,647 24-10-2020, 04:38 PM
Último mensaje: Simemart
  Mosfet. Mi Anet A8 no calienta. Ving399 1 863 02-10-2020, 10:37 PM
Último mensaje: Simemart
Pregunta La maquina no calienta, problema con def ks64 40 17,607 21-03-2020, 09:59 PM
Último mensaje: Jaimetruber