This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
SpainLabs - Comunidad 3D, Arduino, Raspberry, CNC, y más   ›   Zona Impresoras 3D   ›   General   ›   Archivo configuración slic3r E3Dv6 ABS 3.0 nozzle 0.4

  • 1 voto(s) - 4 Media
  • 1
  • 2
  • 3
  • 4
  • 5
Archivo configuración slic3r E3Dv6 ABS 3.0 nozzle 0.4
sorts
Maker Junior
**

Registro en: Oct 2014
Mensajes: 16

Reputación: 0
#1
04-12-2014, 10:38 AM
Hola,

estoy teniendo bastantes problemas para encontrar en slic3r una configuración buena para este nozzle y hotend utilizando abs de 3.0mm, creo que esta es una configuración bastante estándar, alguien sería tan amable de compartir un fichero de config que le de buenos resultados,

Gracias!

Un saludo
  Buscar
  Responder
sorts
Maker Junior
**

Registro en: Oct 2014
Mensajes: 16

Reputación: 0
#2
04-12-2014, 12:59 PM
Podríamos utilizar el hilo para dejar nuestros ficheros de config de slic3r para este hotend, de hecho me ha costado bastante encontrar configuraciones para este hoted en la red, puede servir de discusión. Ahí va el mio, no funciona mal, pero no estoy del todo contento ya que en algunos casos las capas no se adhieren bien entre si y deja pegotes de filamento en algunos sitios.

Código:
# Slic3r configuration file for E3DV6 3mm ABS

[filament:ABS 3.00]
bed_temperature = 110
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 0
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 2.93
first_layer_bed_temperature = 110
first_layer_temperature = 250
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 10
slowdown_below_layer_time = 20
temperature = 245

[presets]
filament = ABS 3.00.ini
print = E3D 0.4 Standard.ini
printer = E3Dv6 0.4.ini

[print:E3D 0.4 Standard]
avoid_crossing_perimeters = 1
bottom_solid_layers = 4
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 20
brim_width = 3
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_perimeter_speed = 20
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.4
fill_angle = 45
fill_density = 30%
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_extrusion_width = 0.4
first_layer_height = 0.2
first_layer_speed = 90%
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.4
infill_first = 0
infill_only_where_needed = 0
infill_speed = 25
interface_shells = 0
layer_height = 0.2
min_skirt_length = 0
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 0
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.5
perimeter_speed = 25
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 5
skirt_height = 2
skirts = 2
small_perimeter_speed = 20
solid_fill_pattern = rectilinear
solid_infill_below_area = 20
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0.4
solid_infill_speed = 25
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 45
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.4
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0.75
support_material_interface_speed = 30
support_material_pattern = rectilinear
support_material_spacing = 5
support_material_speed = 50
support_material_threshold = 13
thin_walls = 1
threads = 4
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 25
top_solid_layers = 4
travel_speed = 100

[printer:E3Dv6 0.4]
bed_size = 200,180
end_gcode = G91 ; set to relative positioning\nG0 E-5 ; retract filament;\nG90 ; set to absolute positioning\nG92 E0 ; set extruded length zero\nM104 S0 ; turn off extruder temperature\nM140 S0 ; turn off heated bed temperature\nG0 X195 Y175 ; move out of the way\nM84 ; disable motors
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode = ; next layer
nozzle_diameter = 0.4
print_center = 100,90
retract_before_travel = 2
retract_layer_change = 0
retract_length = 0.5
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 20
start_gcode = M106 S255 ; turn on fan with fan speed set to 100%\nG28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\nG92 E0 ; set extruded length zero
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1
vibration_limit = 0
wipe = 0
z_offset = 0

[settings]
autocenter = 1
mode = expert
  Buscar
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  Nozzle deja marca en las piezas MIX80 10 0 30-03-2024, 04:07 PM
Último mensaje: Simemart
  CONSULTA Quemaduras con el nozzle artillery genius Lokurasss 4 113 16-03-2023, 06:33 PM
Último mensaje: Simemart
  Marcas del nozzle en la última capa galiana 2 263 18-01-2023, 08:25 PM
Último mensaje: galiana
  DUDA Mensaje de error en ender 3 (no calienta nozzle) Ragnarltbk 4 4,654 04-02-2022, 02:56 PM
Último mensaje: Ffl23
  Calibracion y altura del nozzle ams365 1 390 06-01-2022, 01:20 AM
Último mensaje: Simemart