This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
CONSULTA El sensor de tempetura de la cr10 tiene polaridad
#1
hola tengo la boquilla extrusora rota y he decidido cambiarla pero la duda que tengo es si la resistencia calefactora y el sensor de temperatura poseen polaridad ; en caso afirmativo me gustaria saber como identificarlo .
 un saludo y gracias ^^
  Responder
#2
las resistencias no tienen polaridad, para medir la temperatura en las impresoras 3d se suelen usar termistores que son resistencias que varian su valor en funcion de la temperatura y asi poder calcularla. Resumen la resistencia calefactora y el termistor son reaistencias y no tienen polaridad.
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  Conexión sensor inductivo Placa 4.2.7 fedasil 8 0 08-01-2024, 11:12 PM
Último mensaje: Simemart
  Ayuda a inepto con Creality CR10 pepezulu2010 7 5,446 05-10-2023, 09:55 AM
Último mensaje: Simemart
  CONSULTA Impresora creality cr10 Smart Pro Maclein 1 620 11-03-2022, 06:17 PM
Último mensaje: Simemart
Triste CONSULTA Actualizando Marlin, TMC2130, LCD y Sensor de filamento betowars 21 1,745 26-12-2021, 11:28 PM
Último mensaje: betowars
Dedo abajo DUDA como configurar sensor inductivo sn04 y eje z_safe_min kimera1988 9 1,054 06-10-2021, 09:08 PM
Último mensaje: Simemart