This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 1 voto(s) - 1 Media
  • 1
  • 2
  • 3
  • 4
  • 5
CONSULTA Temperatura mínima en frío demasiado alta
#1
Buenas. Ha aparecido otro error después de estar un tiempo sin poder imprimir, y ahora es imposible que la temperatura baje. Quiero decir, por mucho que esté a 0º estando el hotend completamente frío, siempre marca 170º. He comprobado los cables del termistor y aparentemente está perfecto. El bloque es uno de E3D, y puse el 5 en temp_sensor_0. La impresora no tiene cama caliente, (no la tengo conectada, y deshabilitada en el firmware) pero me dio por habilitarla en el firmware... y el error también está en la cama. ¿Será problema de la placa? Es una MKS 1.4, pero no se ha llevado ni chispazo, ni se ha caído ni nada :\
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  problemas en el inicio con temperatura alta del extrusor guttygf 8 287 27-01-2023, 07:43 PM
Último mensaje: guttygf
  Resinas 3d alta temperatura. Zarracatanita 0 269 26-02-2022, 12:16 PM
Último mensaje: Zarracatanita
  boquilla muy alta mariaelisaluna 0 534 04-07-2020, 07:33 PM
Último mensaje: mariaelisaluna
  Material indicado para intemperie: Sol, lluvia, frio y calor yorelito 2 1,081 06-04-2020, 10:18 PM
Último mensaje: yorelito
  CONSULTA Soportes demasiado pegados OrtegoWRX 4 1,349 04-11-2019, 03:41 PM
Último mensaje: OrtegoWRX