This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
Nuevo algoritmo de ahorro de material
#1
Hola,

Os pongo un enlace a un articulo sobre un nuevo algoritmo que permite ahorrar hasta un 70% de material de impresión y material de soporte:

http://www.3ders.org/articles/20130923-s...erial.html
Poseedor Prusa i3 edición Conjunta.
Tinkercad: Principiante.
Openscad: Principante.
Thingiverse: http://www.thingiverse.com/vimajo/designs
  Responder
#2
por las fotos impresas y el soporte, diria que es para una impresora laser. Es imposible utilizar eso para las nuestras Triste
  Responder
#3
Según se muestra también sirve para las nuestras. Gran sonrisa

Cita:[Imagen: skin-frame-structure-3d-printing-material-6.png]

FDM 3D printers need to add extra supporting structures to print the objects. Left: the printed result with supporting structure generated by commercial software; Right: the printed result with supporting structure generated by researchers' algorithm.
Poseedor Prusa i3 edición Conjunta.
Tinkercad: Principiante.
Openscad: Principante.
Thingiverse: http://www.thingiverse.com/vimajo/designs
  Responder
#4
Creo que usando el Meshlab de Autodesk se pueden hacer este tipo de soportes y es gratuito.

Un saludo.
  Responder
#5
FJ_Sanchez escribió:Creo que usando el Meshlab de Autodesk se pueden hacer este tipo de soportes y es gratuito.

Un saludo.

¿Como lo haces con el Meshlab?
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  CONSULTA Retracciones para material EP de Smart material Nai392 0 205 25-12-2022, 11:18 PM
Último mensaje: Nai392
  el mejor material para imprimir una estatuilla? josssss 1 756 26-04-2021, 11:47 PM
Último mensaje: neoxM3
  Material indicado para intemperie: Sol, lluvia, frio y calor yorelito 2 1,081 06-04-2020, 10:18 PM
Último mensaje: yorelito
  DUDA Acabado en material de soporte PETG alonsoaa25 1 1,403 15-10-2019, 03:18 PM
Último mensaje: Estrallator
  Material idóneo para objetos sometidos a flexion p52sarup 3 1,625 26-04-2019, 03:26 PM
Último mensaje: Merenat