This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
Non-warping, no smell, PET filament
(Sorry for English)

No shrinking or warping.
No smell.
No enclosure required.
Build plate can be heated or not (depends on brand).
Can be printed on glass without any glue*
Does not absorb water or moisture from air, so no storage container needed.
Clear color is the most transparent of all filament materials.
Is much "tougher" that PLA or ABS; will bend before breaking.
Uses about the same extruder temps as ABS.
Does not need a print cooling fan like PLA does.
Also known as Polyester, PETG, PETT, PET+
Is what most soda pop bottles are made of.
Does not degrade in water.
FDA approved in the USA for for food contact.
Not brittle.
Is the most recycled plastic.
Prices are coming down, and some are about the same as ABS.

Test model:
Printing video:
Result video:

Current places carrying PET:

eSun - from Intservo, in North Carolina USA:
*opaque black is tested to print onto glass without any glue at all;
stays attached above 80C, and pops off at room temp.

eSun - from Intservo on Ebay, in North Carolina USA:

Alchement - from New Jersey, USA (choose PET from the menu):

RepRapperTech in Hong Kong:

Made Solid - from California USA:

Made Solid - from Matter Hackers, in California USA:

Made Solid - from Design Box, in Ohio USA:

Made Solid - From Australia:

Colorfabb XT - from Netherlands:

Colorfabb XT - from Printed Solid, in Delaware USA:

Taulman T-Glase - from Matter Hackers, in California USA:

Taulman T-Glase - from MakerGeeks, in Missouri USA:

Taulman T-Glase - from Imprinte 3D, in France:

Eco PETG - from China (must email to order):

Reprap PET - from Denmark:

Gizmo Dorks - in Los Angeles, USA:


3D Prima, from Sweden:

Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  APORTE Recicladora de botellas PET a filamento de impresora 3d. caracolmaker 1 178 30-11-2021, 12:36 PM
Último mensaje: caracolmaker
  CONSULTA Secuencia Change Filament Cura NO FUNCIONA Ender 3 lorenzzomp 3 177 20-10-2021, 08:25 PM
Último mensaje: Macuho
  DUDA Warping al Imprimir varios colores PETG lorenzzomp 6 218 13-10-2021, 02:21 PM
Último mensaje: lorenzzomp
  CONSULTA Necesito ayuda impresion PET fras 5 1,601 28-04-2018, 03:24 PM
Último mensaje: PrimeraRata
  Problema con ABS, warping y no se pegan algunas capas vegetto 3 1,391 28-03-2018, 01:50 PM
Último mensaje: Lepes