This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
Motor gira siempre en el mismo sentido con Sanguinololu 1.3b
#1
Buenas!

Estoy acabando de montar una Prusa i3, pero tengo un problema que no sé solucionar: El motor correspondiente al eje X siempre gira en el mismo sentido.
He cambiado el motor y el controlador polulu y sigue igual, así, que no es tema de motor ni controlador.

Está la placa jodida, o es cosa de software? Me extraña que sea la placa, pero es que no tengo ni idea de como solventarlo , y por eso os pido ayuda.

Qué puede ser?


Gracias!
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  DUDA Error home z no se hace siempre a la misma altura Ender 3 lorenzzomp 10 1,004 06-12-2021, 10:08 PM
Último mensaje: Simemart
  Diferencias de configuracion segun driver para el mismo motor 21Curiosos 2 1,076 24-04-2020, 08:21 PM
Último mensaje: 21Curiosos
  CONSULTA SIEMPRE CALIBRANDO GRANVIDAL 1 729 11-04-2020, 01:55 AM
Último mensaje: Simemart
  CONSULTA SIEMPRE CALIBRANDO GRANVIDAL 0 561 11-04-2020, 01:33 AM
Último mensaje: GRANVIDAL
  Ender 3 siempre a 220º Boba_Fuett 10 2,402 01-12-2018, 04:26 PM
Último mensaje: Boba_Fuett