This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
Laser de fibra
#1
Buenas, después de mucho tiempo planteándome el tema del láser de fibra me he aventurado y lo he comprado, alguien sabe tutoriales en castellano?
  Responder
#2
El propio fabricante tendra, en teoria no deberia ser muy diferente a un laser normal.

Que modelo has comprado? Cuanto te ha costado?

Ya nos dejaras fotos de resultados, me interesa Sonrisa

Saludos,
-> Mi CNC de escritorio CNCDesktop 500 -> https://www.spainlabs.com/foros/tema-Fresadora-Desktop-CNC-500
-> Laboratorio de Fabricación Digital Maker www.lowpower.io 
--> Twitter: https://twitter.com/Grafisoft_ES  | IG: https://www.instagram.com/lowpowerio/
  Responder
#3
la intrucciones son un pedazo de libro de 150 paginas en ingles.

la maquina es de lo mas sencillo para lo que tengo pensado hacer suficiente https://vevor.es/products/maquina-de-mar...til-64-bit
  Responder
#4
Aquí están las primeras pruebas


[Imagen: IMG-20210125-193653.jpg]

[Imagen: IMG-20210125-193758.jpg]
  Responder
#5
Queda muy bien no? Se ve una linea muy gruesa, es asi el dibujo?

Saludos,
-> Mi CNC de escritorio CNCDesktop 500 -> https://www.spainlabs.com/foros/tema-Fresadora-Desktop-CNC-500
-> Laboratorio de Fabricación Digital Maker www.lowpower.io 
--> Twitter: https://twitter.com/Grafisoft_ES  | IG: https://www.instagram.com/lowpowerio/
  Responder
#6
Si es así el dibujo lo difícil va a ser llegar a un punto entre velocidad potencia y pasadas para que no se vean los bordes "quemados" pero eso sera a base de quemar metal.
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  DUDA Laser GRBL no detecta mi máquina laser Hamman84 0 1,003 28-04-2022, 07:24 PM
Último mensaje: Hamman84
  Modulo laser 50w fibra ecore 1 669 21-06-2021, 07:29 AM
Último mensaje: grafisoft
  CONSULTA Laser dévil en GRBL Laser fjfsanchez 8 5,600 27-01-2021, 08:53 PM
Último mensaje: Gussos
  CONSULTA Corte láser de fibra de carbono Marcos Hangar 16 4 2,684 25-01-2019, 09:54 AM
Último mensaje: emiliogallo
  Máquina de grabado láser de fibra 3D para relieve 3d BonnieStylecnc 0 1,283 20-07-2018, 09:32 AM
Último mensaje: BonnieStylecnc