This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
CONSULTA Marcas en el corte
#1
Hola a todos acabo de adquirir una laser de Co2 de 40w y noto que en el corte deja unas marcas como puntos y deja el borde irregular...
[Imagen: IMG-20200928-232741.jpg]
  Responder
#2
Puede ser el reflejo del laser en el fondo de la maquina.
-> Mi CNC de escritorio CNCDesktop 500 -> https://www.spainlabs.com/foros/tema-Fresadora-Desktop-CNC-500
-> Laboratorio de Fabricación Digital Maker www.lowpower.io 
--> Twitter: https://twitter.com/Grafisoft_ES  | IG: https://www.instagram.com/lowpowerio/
  Responder
#3
¿Que material usas de colada o de extrusion?

Un saludo
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  CONSULTA Falta de precisión en corte Laser txetxua 5 163 05-02-2023, 08:13 PM
Último mensaje: grafisoft
  Problemas de ondulaciones en el corte gerson3366 2 234 29-10-2022, 10:07 PM
Último mensaje: gerson3366
  Error de corte k40 hulkelpetit 5 2,534 07-06-2022, 06:46 PM
Último mensaje: Popazo
  Laser deja quemadura al inicio de cada corte chester lanzo 11 2,393 01-09-2021, 02:42 PM
Último mensaje: chester lanzo
  APORTE Gorrion Puzle 3D Corte Laser caorpe 0 641 19-04-2021, 10:26 PM
Último mensaje: caorpe