This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
CONSULTA Actualizar x1
#1
Hola a todos, me presento en el foro ,ya que soy nuevo.

llevo un par de meses con la artillery x1, y por desconocimiento rompí la pieza de entrada del filamento, ya la cambié, pero he visto que ya no imprime igual .

he visto en varios lugares, que hay que calibrar el extrusor y actualizar el firmware de nuestra impresora.

Necesito por favor, que alguien me diga como hacer esta actualización puesto que estoy muy liado, el pc no reconoce mi impresora mediante cura, he desconectado el cable tft como dicen , pero no doy con la solución.


 agradezco quien pueda ayudarme
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  Problema al actualizar firmware Artillery X1 SVM Designs 1 5,973 01-07-2020, 10:20 PM
Último mensaje: juanlu46