This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
Cyclone Triggerr Edition V1
#21
Me estoy volviendo loco para encontrar las instrucciones para montarla. encuentro los stl. encuentro el soft. no encuentro las instrucciones de montaje....
  Responder
#22
ebludt escribió:Me estoy volviendo loco para encontrar las instrucciones para montarla. encuentro los stl. encuentro el soft. no encuentro las instrucciones de montaje....

yo estoy igual...
  Responder
#23
Alguien sabe las vitaminas que hacen falta para la cyclone?? tengo casi todas las piezas impresas
  Responder
#24
Échale un ojo a esto:

https://docs.google.com/spreadsheets/d/t...g/htmlview

Y a esto:

https://docs.google.com/spreadsheets/d/t...w/htmlview
  Responder
#25
IsMaxice escribió:Échale un ojo a esto:

https://docs.google.com/spreadsheets/d/t...g/htmlview

Y a esto:

https://docs.google.com/spreadsheets/d/t...w/htmlview

Esas son BOM de la versión antigua, la 0.97, aparte de que están incompletas.

Si os bajáis las fuentes desde su github (https://github.com/carlosgs/Cyclone-PCB-...e/v2.1.zip), y abrís el fichero Source_files->Cyclone.scad con el OpenScad, tendréis una lista de componentes en la consola.

Aquí abajo, lo tenéis resumido:
Cita:Base. Size [215, 120, 11]mm -> 1
Base. Size [304.8, 261.62, 8]mm -> 1
Linear bearing. Model LM8UU -> 11
Motor: Nema17, length= 39mm -> 3
Nut. M3. -> 58
Nut. M8. -> 10
Nut. M8. With chamfer. -> 5
Paper sheet. A4. Thickness 0.05mm -> 1
Radial bearing. Model 608 -> 5
Rod. Smooth. Diameter 8.2mm. Length 110mm -> 2
Rod. Smooth. Diameter 8.5mm. Length 210mm -> 2
Rod. Smooth. Diameter 8.5mm. Length 250mm -> 2
Rod. Threaded. Diameter 8.5mm. Length 200mm -> 1
Rod. Threaded. Diameter 8.5mm. Length 300mm -> 1
Rod. Threaded. Diameter 8.5mm. Length 90mm -> 1
Rubber foot. Diameter 40mm. Thickness 8mm -> 4
Screw. M3. Length 10.4mm -> 3
Screw. M3. Length 10mm -> 4
Screw. M3. Length 12.4mm -> 6
Screw. M3. Length 13.4mm -> 3
Screw. M3. Length 13mm -> 8
Screw. M3. Length 20.4mm -> 18
Screw. M3. Length 24.25mm -> 12
Screw. M3. Length 24mm -> 5
Screw. M3. Length 27.4mm -> 2
Screw. M3. Length 28.5mm -> 2
Screw. M3. Length 28mm -> 4
Washer. Diameter 15.3mm. Thickness 0.7mm -> 1
Washer. Diameter 15.8mm. Thickness 1.6mm -> 1

PD: El hecho de que las varillas tengan valores por encima de 8mm supongo que será por temas de tolerancia
  Responder