This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
CONSULTA Mostrar en el display nombre del archivo que se esta imprimiendo
#1
Me podeis indicar que comando gcode tengo que utilizaren las instrucciones de inicio de la impresora para que aparezca en el display el nombre del archivo que se esta imprimiendo.
Tengo una Moebyus Sirius con autonivelacion con este codigo de inicio
    ;Inicio Gcode


G28 XYZ
G92 E0
G28          ; home all axes
G29          ; Autolevel


M190 S[first_layer_bed_temperature]         ; set bed temperature and wait for it to be reached
M104 S[first_layer_temperature] T0          ; set temperature
M104 S[first_layer_temperature] T1          ; set temperature
M109 S[first_layer_temperature] T0          ; set temperature and wait for it to be reached
M109 S[first_layer_temperature] T1          ; set temperature and wait for it to be reached

G92 E0                         
G1 X288 Y5 Z5 F6000                              ;Purga
G1 X168 Y5 Z0.2 E30 F1000                        ;Purga
G1 X168 Y5 Z5.0 E25 F6000                        ;Purga

T1
G92 E0
G1 X048 Y5 Z5 F6000                              ;Purga
G1 X168 Y5 Z0.2 E30 F1000                    ;Purga
G1 X168 Y5 Z5.0 E25 F6000                    ;Purga

T0
G28 X
G1 Z5 F5000 ; lift nozzle
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  CONSULTA Configurar Marlin desde archivo TXT ealvarezd 3 592 09-10-2021, 07:07 PM
Último mensaje: Simemart
  CONSULTA Error en Repetier, al convertir archivo a g-code Jaume Cat 0 955 03-05-2020, 06:55 PM
Último mensaje: Jaume Cat
  Error en Repetier, al convertir archivo a g-code Jaume Cat 0 710 03-05-2020, 06:51 PM
Último mensaje: Jaume Cat
  No sé que he tocado en mi configuración del Cura... Kuassimodo 8 1,966 16-04-2019, 02:57 PM
Último mensaje: maxlinux2000
  Mensaje en display previo a impresión monomanco 3 2,296 15-10-2018, 12:33 PM
Último mensaje: monomanco