This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
CONSULTA Fallo al instalar marlin 2.0 en mi anet A6
#1
Hola buenas estoy intentado instalar Marlin 2.0 en mi anet A6-l (Una anet a6 con pantalla de anet A8) y me está dando error al ahora de subir los archivos.
La compilación la hace correctamente osea que el código está correcto.

Os dejo el link a la impresora: https://es.aliexpress.com/item/328338672...63c0xsPI48

Código:
Arduino:1.8.13 (Windows 10), Tarjeta:"Anet V1.0"

El Sketch usa 115370 bytes (90%) del espacio de almacenamiento de programa. El máximo es 126976 bytes.

Variables globales usan 4385 bytes de memoria dinamica.

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xd6

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x6f

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x80

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xbf

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xae

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xd6

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x02

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x21

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xcc

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xd6

Ha ocurrido un error mientras se enviaba el sketch



Este informe podría contener más información con
"Mostrar salida detallada durante la compilación"
opción habilitada en Archivo -> Preferencias.
  Responder
#2
Hola, el problema está en la comunicación entre el ordenador y la placa de la impresora.
Lo primero que habría que ver es si realmente es una Anet v1.0 o compatible con ella: una foto en la que se vea bien la placa sería de ayuda.
Si la placa es la Anet, ¿tienes configurado en el IDE de Arduino el puerto COM correcto? Comprueba en el Administrador de dispositivos cual es el que tiene asignado la impresora.
Si ambas cosas están correctas, quizá el problema sea que la placa no tiene grabado el bootloader, lo que significa que no se podrá cargar el firmware mediante la conexión USB, hasta que no se grabe en ella el mismo.
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  DUDA Error verificar Marlin 2.0 Anet a8 Nero418 7 207 11-02-2023, 02:16 PM
Último mensaje: Nero418
Video APORTE INSTALAR MARLIN EN ANET A8 PLUS CON OPCIÓN NIVELADO CAMA kuadri 18 5,797 15-12-2022, 11:59 PM
Último mensaje: Simemart
  Fallo placa ANET A8 plus TOTE 17 1,565 04-02-2022, 11:46 PM
Último mensaje: Simemart
  DUDA Problema el subir Marlín 2.0 a Anet con marlín 1.1.9.1 srsamu98 4 2,263 21-01-2021, 01:54 AM
Último mensaje: MY7
  Problema al instalar marlin 2.0 pirados 13 5,851 12-11-2020, 10:19 PM
Último mensaje: VARO_TRUEBA96